multiJet
With the multiJet, REGLOPLAS offers a versatile, individually applicable and cycle-accurate solution in pressure die-casting temperature control, which can efficiently cool mould areas where conventional temperature control is inadequate.
- Enables the cooling cors to be connected close to the die-casting tool
- Water distributor with 8 cores per channel
- Flow of up to 33 l/min with a max. pressure of 30 bar
Technical specifications
more
less
System water temperature
Heat transfer medium
Pump capacity/Type
Connections
80
°C
Water
Technical data
more
less
| Outlet temperature | ||
| max. | °C | 80 |
| Heat transfer medium | Water | |
| Number of channels | 8 | |
| Connections | ||
| Connection compressed air | G 1/4" (IG) | |
| Inlet/outlet TCU | G 1/2" / BSP 60° | |
| Connection inlet water | G 1/2" / BSP 60° | |
| Connection outlet core | G 1/8" IG | |
| Connection inlet core | G 1/8" IG | |
| Degree of protection | IP54 | |
| Dimensions W/H/D | mm | 303/188/149 |
| Weight | kg | 4 |
| Ambient temperature | ||
| max. | °C | 40 |
Standard equipment
more
less
- Blow out
- Cooling with air or water